(0)
Corotech V410-86-1
Fast-dry polyamide epoxy is a unique satin sheen epoxy that cures fully in 24 hr at 77 deg F. In addition, this product cures in temperatures as low as 35 deg F in approximately 5 days. Fast-dry polyamide epoxy may be used as a high-durability floor finish that can be put into service 24 hr after coating application when applied at 77 deg F.
| Applicable Materials | : | Concrete, Iron, Non-Ferrous Metal, Steel |
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 35 to 100 deg F |
| Color | : | Tintable White |
| Compositions | : | 4, 4-isopropylidenediPhenol-epichlorohydrin Copolymer, Copolymer, bisPhenol A Diglycidylether-BisPhenol A, Titanium Dioxide, Xylene, Ethyl benzene, Solvent Naphtha, Petroleum, light aromatic, 1, 2, 4-Trimethylbenzene, Propylene glycol Monomethyl ether acetate, Silica, amorphous |
| Coverage Area | : | 350 to 500 sq-ft/gal |
| Drying Time | : | 3 to 4 hr |
| Flammability Rating | : | 3 |
| Flash Point | : | 81 deg F |
| Functional Cure Time | : | 3 to 5 days |
| Mixing Ratio | : | 1:1 |
| Net Content | : | 1 gal |
| Odor/Scent | : | Solvent |
| Pressure Rating | : | 2100 psi |
| Resists | : | Abrasion, Acid, Chemical, Hard, Impact, Scratch |
| Sheen | : | Satin |
| Specific Gravity | : | 1.52 to 1.56 |
| Temperature Rating | : | 40 to 90 deg F |
| VOC Content | : | <250 g/L |
| Viscosity | : | 100 to 105 ku |
- Fast cure and low temperature applications
- Excellent for all metal and masonry surfaces
- Suitable for use in USDA inspected facilities
SDS