(0)
Bostitch HP118K
Adjustable high/low power control sets pin depth without changing compressor setting. Low-profile nosepiece tapers down to contact point. Lightweight, durable aluminum housing. Overmolded grip. Rear exhaust. Weighs 2.5 lb, driving power is 60 in-lb, operating pressure is 70 to 120 psi, 1/4 in NPT thread fitting type, magazine capacity is 200 pins. 1/2 to 1-3/16 in 23 ga headless pin nails. Includes pin nailer, 1/4 in air fitting, 500 each of 1/2 in pins, 3/4 in pins, 1 in pins and case.
| Air Inlet Size | : | 1/4 in |
| Air Pressure | : | 70 to 120 psi |
| Collation Type | : | Glue |
| Dimensions | : | 12 in L x 3 in W x 11 in H |
| Exhaust Type | : | Rear |
| Fastener Size | : | 1/2 to 1-3/16 in |
| Handle Type | : | Overmold Grip |
| Includes | : | (500) 1/2 in Pins, 1 in Pins, 1/4 in Air Fitting, 3/4 in Pins, Case |
| Magazine Capacity | : | 200 |
| Magazine Loading | : | Side |
| Triggering Mode | : | Sequential |
- Adjustable high/low power control sets pin depth without changing compressor setting
- Low-profile nosepiece tapers down to contact point for clear line-of-site
- 19% greater pin capacity over competitive models for a wider range of fasteners
- Lightweight, durable aluminum housing