(0)
OSI 827653
OSI FRP555 latex FRP adhesive is a strong, flexible adhesive, specifically formulated for fiberglass reinforced plastic panel installation. This water-based formula is easy to trowel and cures to a strong yet flexible bond. OSI FRP555 is unaffected by moisture, steam, water, heat or cold when fully cured. It will not harm or burn-through tub kit materials. OSI FRP555 cleans up easily with soap and water while wet. Its low-VOC formulation meets stringent state and federal requirements.
| Applicable Materials | : | Plywood |
| Application Method | : | Trowel |
| Application Temperature | : | 50 to 90 deg F |
| Boiling Point | : | 212 deg F |
| Color | : | Off-White |
| Compositions | : | Limestone, Ethylene Glycol, Quartz (SiO2) |
| Container Type | : | Pail |
| Coverage Area | : | 50 to 60 sq-ft/gal |
| Form | : | Paste |
| Functional Cure Time | : | 1 to 7 days |
| Net Content | : | 1 gal |
| Odor/Scent | : | Mild Acrylic |
| Specific Gravity | : | 1.42 |
| Type | : | Fiberglass-Reinforced |
| VOC Content | : | 44.3 g/L |
| Viscosity | : | 200, 000 to 300, 000 mPa-s |
- Easy to trowel and cures to a strong, flexible bond
- High initial grab minimizes panel slippage
- 30 mins repositioning time allows for correction of misaligned materials
- Will not etch, damage or burn through plastic or foam panels
- Water-based adhesive
- Non-flammable, low-odor and easy soap and water clean-up for uncured adhesive
SDS