(0)
Benjamin Moore 032620-001
A premium quality coating specifically designed to enrich the beauty of woods like mahogany, teak and ipe. This durable finish enhances the look of hardwoods, while offering great protection from water and sun damage. With a deeply penetrating alkyd/tung oil formula, this mildew-resistant coating will stave off the aging of wood. May also be used on traditional woods like pine, cedar and redwood.
| Applicable Materials | : | Wood |
| Application Method | : | Roller, Sprayer |
| Boiling Point | : | 279 deg F |
| Color | : | Redwood |
| Compositions | : | Distillates, Petroleum, Hydrotreated Light, 4-Chlorobenzotrifluoride, Stoddard Solvent, Silica, Amorphous, Zinc Borate Hydrate, Carbamic Acid, 1H-Benzimidazol-2-yl-, Methyl Ester, Ethyl Benzene, Methyl Ethyl Ketoxime |
| Coverage Area | : | 200 to 350 sq-ft |
| Density | : | 8.1 to 8.2 lb/gal |
| Drying Time | : | 6 to 8 hr |
| Flammability Rating | : | 2 |
| Flash Point | : | 107 deg F |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Pigment Type | : | Trans-Oxide |
| Sheen | : | Flat |
| Specific Gravity | : | 0.97 to 0.99 |
| Temperature Rating | : | 40 to 90 deg F |
| VOC Content | : | 340 g/L |
| Vehicle Type | : | Alkyd, Tung Oil |
| Viscosity | : | 49 ku |
- Provides protection while allowing all of the natural beauty of the wood grain pattern and texture to show through
- Superior UV protection
- Resists blistering, peeling, stains and scuffs
- Specially formulated to resist mildew growth on the stain film
- May be applied to both soft and hardwoods
- Protection from water and sun damage
- Can also be applied to wood previously stained with a transparent or semi-transparent stain that is weathered but is not flaking or peeling
SDS