(0)
Benjamin Moore V155.90.4
100% Solids epoxy pre-primer is formulated for use on both steel and masonry. For rusted steel where extensive surface preparation is needed, but not logistically possible, the penetrating properties and extended dry time -16 hrs at 77 deg F of this two-component epoxy seal crevices and other imperfections, promoting better adhesion for subsequent coats. For prepared masonry surfaces, V155 penetrates and seals, providing an excellent foundation for subsequent coats of Corotech® epoxy floor coatings. The unique, 100% solids formula of V155 forms a sealed epoxy barrier that inhibits future corrosion.
| Applicable Materials | : | Galvanized Metal, Steel |
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 55 to 90 deg F |
| Color | : | Clear |
| Compositions | : | Phenol, 2, 4, 6-Tris[(Dimethylamino)methyl], Benzyl Alcohol, Ethylenediamine, 2-Pentanone, 4-Methyl |
| Container Type | : | Pail |
| Coverage Area | : | 1200 to 1600 sq-ft/gal |
| Curing Time | : | 5 to 7 days |
| Density | : | 7.3 to 7.4 lb/gal |
| Drying Time | : | 12 hr |
| Drying Type | : | Chemical Cure |
| Flash Point | : | 135 deg F |
| Net Content | : | 4 gal |
| Odor/Scent | : | Little or No Odor |
| Resin Type | : | Solid Epoxy |
| Sheen | : | Semi-Gloss |
| Specific Gravity | : | 0.88 to 0.9 |
| VOC Content | : | 0.05 lb/gal |
| Viscosity | : | 30 to 50 s |
- Low viscosity easily fills voids and crevices
- Does not shrink
- Chemical- and fume-resistant
- Extended cure time allows maximum penetration
- Seals previously coated concrete, masonry and galvanized metal
SDS