(0)
UGL 28613
Latex base DRYLOK® EXTREME masonry waterproofer is the next generation in waterproof coatings. Features flexible encapsulated polymers which squeeze into the masonry for the ultimate in waterproof protection. Specially formulated to resist mildew growth on the dry paint film with the incorporation of an environmentally friendly green biocide. Fully transferable 15 years warranty. Tested to ASTM D-7088 Resistance to hydrostatic pressure at 15 psi and ASTM D6904 resistance to wind driven rain. Reduces Radon gas penetration.
| Applicable Materials | : | Acrylic, Cement, PVC |
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 50 deg F |
| Base Type | : | Latex |
| Boiling Point | : | 100 deg C |
| Color | : | White |
| Compositions | : | Titanium Dioxide, Diethylene Glycol Monomethyl Ether, 2-Propanol, 1-(2-Butoxy-1-Methylethoxy)-, Propanol, Oxybis-, Dibenzoate |
| Container Type | : | Pail |
| Coverage Area | : | 75 to 100 sq-ft/gal |
| Density | : | 9.8 to 10 lb/gal |
| Drying Time | : | 2 hr |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Odor/Scent | : | Ammonia |
| Resists | : | Hydrostatic Pressure, Mildew, Wind Driven Rain |
| Specific Gravity | : | 1.26 |
| VOC Content | : | <100 g/L |
| Viscosity | : | 110 to 120 ku |
| pH Range | : | 9 to 9.9 |
- Guaranteed to stop water
- Helps protect against radon gas penetration by reducing vapor transfer
- Low-odor formula complies with all current VOC requirements
- Breathable film will not trap moisture in the masonry
- Easy cleanup with warm, soapy water
- Tintable, bright white, smooth finish formula features flexible encapsulated polymers for the ultimate in waterproof protection
- Incorporation of a green biocide helps the dry paint film resist mildew growth
- No pre-mixing or pre-wetting
- After 24 hrs, DRYLOK® will accept a decorative topcoat using a good quality latex paint