(0)
Zinsser 276049
Zinsser Mold killing primer is a water-based fungicidal protective coating that can be used to paint over all existing mold, mildew, moss, fungi, odor causing bacteria and any other fungal organisms. The mold killing primer contains an EPA-registered antimicrobial to prevent the growth of mold, mildew and other fungal organisms on the paint film. The mold killing primer also aides in covering residual microbiological and fungal stains.
| Application Method | : | Brush, Roller, Spray |
| Application Temperature | : | 40 to 80 deg F |
| Base Type | : | Water |
| Boiling Point | : | 100 to 537 deg C |
| Color | : | White |
| Compositions | : | Titanium Dioxide |
| Container Type | : | Can |
| Coverage Area | : | 400 to 450 sq-ft/gal |
| Curing Time | : | 7 days |
| Density | : | 1.407 Relative |
| Drying Time | : | 1 hr |
| Flammability Rating | : | 1 |
| Flash Point | : | 94 deg C |
| Net Content | : | 1 gal |
| Odor/Scent | : | Mild |
| Pigment Type | : | Calcium Carbonate |
| Sheen | : | Flat |
| VOC Content | : | 1 g/L |
- Paint directly overmold
- Kills existing mold, mildew and odor causing bacteria
- Binds chalky siding, masonry and metal
- For stains caused by water leaks, allow mold killing primer to dry then use a Zinsser stain blocking primer
- Interior and exterior use
SDS