Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4 in thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once and you will never look back.

• When used with Festool guide rails, you can achieve ideally straight and splinter-free cuts
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade
• The slip clutch helps to minimize the risk of a kick-back and minimizes wear on the blade, gear case and motor
• Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal
• A ideal cut the first time, every time, with laser-straight, splinter-free cuts
• The TS 75 makes the actual cut right on the edge of the scribe line, even on bevel cuts
• Variable-speed allows you to match the speed of the saw to the material
• Blade changes are easier and safer using the FastFix system, when engaged the power switch and arbor are locked simultaneously
• Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts

• Instruction/Installation Manual https://assets.unilogcorp.com/187/ITEM/DOC/Festool_103547424_Instruction_Installation_Manual.pdf