(0)
Insl-X EC321009905
Lead BLOCK® is a water-based elastomeric acrylic coating with excellent adhesion, elongation and tensile strength characteristics. When applied to surfaces bearing lead-containing paint, this product will seal in the lead paint with a thick, elastic membrane sheathing.
| Applicable Materials | : | Drywall, Masonry, Metal, Metal Substrate, Plaster, Stucco, Trim and Ceiling, Wall, Wood |
| Application Method | : | Airless Spray |
| Application Temperature | : | 50 to 95 deg F |
| Base Type | : | Water |
| Boiling Point | : | 212 deg F |
| Color | : | White |
| Compositions | : | Limestone, Titanium Dioxide, Propylene Glycol, Zinc Oxide, Carbamic Acid, Butyl-, 3-Iodo-2-propynyl Ester |
| Coverage Area | : | 85 to 100 sq-ft/gal |
| Density | : | 10.9 to 11 lb/gal |
| Drying Time | : | 2 to 4 hr |
| Flash Point | : | 32 deg F |
| Net Content | : | 5 gal |
| Pigment Type | : | Titanium Dioxide |
| Sheen | : | Eggshell |
| Specific Gravity | : | 1.3 to 1.32 |
| VOC Content | : | <100 g/L |
| Vehicle Type | : | Acrylic |
| Viscosity | : | 125 to 130 ku |
- Cost effective alternative to lead paint remediation
- Creates a barrier over lead paints
- For interior or exterior use
- Spray application preferred
- Can be used as a primer or top coat
SDS