(0)
The Richmond® Essential® RMTEX-04 is a 3.5 kW tankless electric water heater ideal for low flow point-of-use applications. Typically this unit is installed at the point-of-use and hard wired to 120 V requiring a 30 A breaker. Richmond® Essential® tankless electric water heaters offer a continuous, endless supply of hot water. A lower kilowatt unit can provide hot water on demand for single or multiple point-of-use applications while a higher kilowatt unit could provide hot water for a whole house depending on the inlet ground water temperature. Tankless electric water heaters save space, save energy, save money and require no venting. The sleek, compact size, 90% smaller than a tank, allows you to save space and place the unit wherever you want, including under a sink. Tankless units only draw energy when hot water is flowing, while traditional tanks are constantly drawing energy to keep the water in the tank at the desired temperature.
| Cable Size | : | 10 AWG |
| Current Rating | : | 29 A |
| Dimensions | : | 5-7/8 in H x 10-7/8 in W x 4 in D |
| Energy Efficiency | : | 0.998 % |
| Flow Rate | : | 0.5 to 2 gpm |
| Heating Chamber Material | : | Copper |
| Inlet Connection Size | : | 1/2 in |
| Number of Phases | : | 1 |
| Pressure Rating | : | 25 to 150 psi |
| Voltage Rating | : | 120 V |
| Wattage Rating | : | 3.5 kW |
- Save on water heating costs
- No standby heat loss, activates only when hot water is needed
- Instant, continuous hot water
- 99.8% Energy efficient
- Reduces calcification and sedimentation
- Digital temperature display used to control temperature can adjust in increments of 1 deg F
Instruction/Installation Manual