(0)
Insl-X TP3380099-05
A fast-set paint for marking traffic lanes on streets, highways, parking lots, warehouses and other areas where such marking is required. Traffic beads may be dropped into this coating while wet to provide light reflecting markings. If beads are applied, they should be broadcast into the wet paint at a rate of 6 pounds of beads per gallon of paint and paint should be applies at 15 mils WFT.
| Applicable Materials | : | Asphalt, Concrete |
| Application Method | : | Brush, Roller, Spray |
| Color | : | Yellow |
| Compositions | : | Limestone, Titanium Dioxide, Silica, Crystalline |
| Container Type | : | Can |
| Coverage Area | : | 320 linear ft |
| Drying Time | : | 20 min |
| Net Content | : | 5 gal |
| Odor/Scent | : | Solvent |
| Pigment Type | : | Titanium Dioxide |
| Sheen | : | Flat |
| Specific Gravity | : | 1.66 to 1.68 |
| Temperature Rating | : | 45 to 95 deg F |
| VOC Content | : | 0.2 lb/gal |
| Vehicle Type | : | Vinyl Acrylic Latex |
| Viscosity | : | 82 to 90 ku |
- Low-odor and low-VOC
- Ideal for marking traffic lanes
SDS